Bravo-Brava ^
TD100
Copyright Fiat Auto
Engine
Removing - refitting
10.
P4A09FX02
1. Working from inside the vehicle, remove
the glove compartment by unscrewing the
retaining bolts shown.
2. Disconnect connector from the i.e. control
unit and withdraw the relay from its brack
et. Then withdraw the engine wiring as
sembly and attach to the power unit.
3. Disconnect the half-axles by undoing the
bolts securing the constant velocity joints
to the gearbox flange.
4. Unscrew bolt (1) and loosen bolt (2) re
taining the suspension pillar. Then turn
the pillar outward to release the drive shaft
from its attachment on the differential.