Braking system
Hydraulic operation
Bravo-Brava
33.
P4A28DA01
1. Disconnect electrical connection from the ig
nition, then unscrew the bolts fastening the
steering column and remove from the car.
2. Disconnect the braking light switch con
nector.
3. Unscrew both nuts retaining the accelera
tor pedal retaining bracket and release the
clutch pedal return spring from the bracket.
4. Disconnect the control cable from its an
chorage on the accelerator pedal, then re
move the accelerator pedal from the vehicle.
5. Remove rubber fitting (1) from the bonnet
opening lever and then release the end of
the opening cable from its seat and take
out through the housing hole of rubber fit
ting (1).
P4A28DA04
8
Publication no. 508.876