Fiat 1996 Brava Service Manual page 781

Electrical equipment
Fiat CODE
JTD
Bravo-Brava $
9 8 range
55.
Place the MASTER key in the OFF position,
extract it and return it, the key programming
procedure is over.
If the procedure has been carried out correctly, i.e. as far as the timing and operations are concerned, if
the ignition key is placed in the ON position, the CODE warning light will go out after coming on initi -
cally for 0.7 seconds, otherwise it will start to flash in rapidly (1.6 Hz); if this is the case, the program­
ming procedure must be repeated.
If a mistake is made (at any time) during the programming procedure, place the ignition key in
the ON position for longer than 2 seconds or in the OFF position for longer than 10 seconds,
then start the key programming procedure again.
8 2 XI-98 - Update Print no. 506.670/17