Engine
Removing - refitting cylinder head
Bravo-Brava ^ TD 100
1. Position a suitable container to collect the
coolant, then disconnect the pipe shown
and drain the coolant.
2. Use tool 1860967000 to unscrew the fit
ting on the head, unscrew bolt (1), dis
connect clips (2) and remove coolant pipe
(3) from the cylinder head.
3. Disconnect the pipe shown from the
cylinder head.
4. Disconnect the pipes shown from the
thermostat.
5. Disconnect the sensor and coolant tem
perature sending unit electrical connec
tions.
P4A22FX05
22
Publication no. 506.670/08