Bravo-Brava 101
12v
Braking system
Hydraulic operation
33.
1. Remove the brake pump without discon
necting the connected brake lines, in order
to release the brake servo rod from the
pump.
2. Release the injection wiring bundle from
the retaining clip, then disconnect the va
cuum intake line from the brake servo.
3. Working from inside the cabin, remove the
left foot rest, located beside the clutch
pedal.
4. Remove the bolt retaining the lower steer
ing column to the power steering box pin
ion.
5. Remove the steering column reinforce
ment bar by unscrewing the retaining
bolts indicated in the figure.
Copyright Fiat Auto
7