Clutch
Clutch operation
4A12DA
Bravo-Brava ^ ^
1. Remove the relay protective cover.
2. Unscrew both nuts retaining the relay
bracket, disconnect the connection indi
cated and position the bracket to one side.
3. Remove the stud retaining the lining of
the
bulkhead
between
lining to one side.
4. Drain the brake and clutch fluid from the
reservoir after disconnecting the level
gauge connector and removing the reser
voir cap.
5. Disconnect the central line connected to
the clutch pump, marked "FRIZ", from the
reservoir.
P4A12DA06
4
Publication no. 508.876