Braking system
Hydraulic operation
Bravo-Brava
33.
REMOVIIMG-REFITTING BRAKE PEDAL
Before removing the brake pedal, remove the clutch pedal as described in "Section 18" of the
right hand drive supplement.
1. Remove the roll pin retaining the brake
servo rod transmission on the brake pedal.
2. Remove clutch and brake pedal retaining
bolt completely and then remove the ped
al from the car.
Brake pedal fastening details
1. Pedal unit
2. Brake pedal
3. Brake servo rod
P4A22DA03
4. Transmission connecting brake pedal -
brake servo rod
5. Device for anchoring brake servo rod and
transmission to brake pedal
2
Publication no. 508.876