Fiat 1996 Brava Service Manual page 393

Engine Bravo-Brava
^TDWO
Fuel system
10.
Speed regulator
The speed regulator connects the accelerator lever (1) to the metering valve (7). Its function is to con­
trol the idle speed (and the fast idle) and the maximum engine speed.
The minimum/maximum regulator unit (mini/maxi device) (2) consists of a pre-loaded spring housed
in a steel tube which connects the accelerator lever (1) to the upper part of the regulator plate (3). The
regulator plate, in turn, causes the metering valve (7) to rotate by means of a connecting rod (5).
A spring (14), fixed to the front section of the regulator plate, controls the idle speed.
The mass carrier (10), which is fixed to the control shaft (11), contains a certain number of masses (9)
subject to a centrifugal force which varies according to the engine rotation speed.
In idling conditions the centrifugal force acting on the masses is weak and the regulator plate is bal­
anced between the force exerted by the masses (9) and the force of the spring (14) resting on the idle
shaft.
During acceleration, the accelerator lever (1) moves the metering valve (7), via the regulator rod (5), to­
wards the completely open position.
The centrifugal force exerted by the masses increases, but remains lower than the pre-loading of the
mini/maxi device (2) spring.
This means that the connection between the metering valve (7) and the accelerator lever (1) is direct.
During the adjustment stage, or when the speed reached increases the centrifugal force of the masses to
such an extent as to overcome the mini/maxi device spring pre-loading force, the regulator controls the
position of the metering valve (7).
In this case the connection between the metering valve (7) and the accelerator lever (1) is no longer di­
rect.
1. Accelerator lever
2. Mini/maxi device
3. Regulator plate
4. Regulator bracket
5. Regulator rod
6. Regulator rod spring
7. Metering valve
8. Regulator sleeve
9. Regulator masses
10. Mass carrier
11. Drive shaft
12. Idle shaft
13. Idle lever
14. Idle spring
14
IX-96 - Cancels and replaces
Print no. 506.670/08