Engine
Removing - refitting cylinder head
Bravo-Brava ^
TDIOO
1. Disconnect
the
fuel
vapour
cut-off
solenoid from the EGR by unscrewing the
nuts indicated and remove the bracket
shown.
2. Unscrew the bolts indicated, separate the
EG R valve from the pipe and then remove.
3. Disconnect the fuel recovery line (1) from
the fuel return sleeve and pipe (2) from
the intake manifold.
4. Use wrench 1852138000 to unscrew the
fittings of the diesel supply lines on the in
jectors.
5. Unscrew the diesel supply line fittings
from the injection pump and then remove
the pipes themselves.
Publication no.
506.670/08