Fiat 1996 Brava Service Manual page 75

Bravo-Brava
Introduction
Planned maintenance
oo.
1. Move the connections and the cables
shown in the diagram aside, then undo
the nuts fixing the brake servo vacuum
pump to the cylinder head and remove it.
2. Position tool 1860934000 for timing the
camshaft, matching the splining (1) for
the camshaft with the projection (2) on
the tool.
Fix the tool to the cylinder head placing
the centering dowel (3) as illustrated in
the diagram. The dowel should be per­
fectly centered on the tool; if it is not, use a
spanner (4) to centre the dowel on the
tool using extremely small movements.
3. Remove the bolt shown in the diagram
which fixes the front cover to the
crankcase. Then fit the timing drive belton
the crankshaft drive gear only.
4. Position tool 1860933000 for accurately
determining T.D.C. for cylinder no. 1. The
tool should be perfectly fixed to the
crankshaft drive gear using two bolts and
using another bolt to the crankshaft front
cover (for the bolt removed previously).
Then loosen the bolt fixing the camshaft
drive pulley using tools 1860831000 and
1860848000.
Copyright by Fiat Auto
41