Fiat 1996 Brava Service Manual page 556

Bravo-Brava igi
9 8 range
16v
Gearbox and differential
External controls
21.27
P4A01BB02
REMOVING-REFITTING
Position the vehicle on a lift, and proceed
with the removal of the external controls as
described below.
Disconnect the negative battery lead, re­
move the protective cover for the positive
pole, disconnect the terminal and separate
the latter from the starter motor supply
leads; undo the nut securing the battery to
the drip tray, then remove the latter from
the engine compartment.
2. Remove the gear lever cover from the ve­
hicle interior.
3. Remove the handbrake protective boot,
then disconnect the electrical connection
underneath.
4. Undo the bolt securing the relay casing
cover and remove it, then undo the nuts
fixing the casing to the battery drip tray
and place the casing at the side.
Copyright by Fiat Auto
9