Bravo-Btava
9 8 range
16v
Gearbox and differential
Removing-refitting
21.27
1. Remove the wiper arms, then remove the
plastic shield for the pollen filter acting on
the special bolts illustrated in the diagram.
2. Position the cross member 1860851000
for supporting the engine at the points i l
lustrated.
a. Front support: fit the tool in the housing in
the bonnet lid lock so that it rests on the
front cross member.
b. Rear support: position the tool by the cen
tre reinforcement for the flame partition.
c. Fix the hook for the cross member to the
heater water supply pipe so that the en
gine is resting in the centre.
P4A03BB05
Copyright by Fiat Auto
3