Bravo-Brava
Introduction
Planned maintenance
oo.
1860898000
P4A35CA02
Bravo-Brava 1910 TD 75 e 100
Position the vehicle on a lift, then:
- disconnect the negative battery lead;
- remove the right front wheel;
- remove the right wheel arch liner.
1. Rotate the device tensioning the auxiliary
shaft drive belt in the direction shown by
the arrow, slacken the belt tension and re
move it.
2. Remove the lower shield for the engine
compartment, undo the bolts for the gear
box shield and position the flywheel lock
1860898000. Then remove the damper
flywheel (auxiliary shaft drive pulley).
3. Remove the lower shield for the timing
belt; remove the reaction connecting rod
complete with mounting bracket near the
upper timing belt shield, then remove the
latter as well.
4. For the 1910 TD 75 version, check that
the injection pump timing is correct by
making sure that references (1) and (2) il
lustrated are in line, then lock the pulley in
position using the service bolts (3) insert
ed in the special housings in the actual
pulley.
Copyright by Fiat Auto
35