Bravo- Brava ©> **
'98 range
Engine
Fuel system
. y
10.
THROTTLE BODY
Removing-refitting
Proceed as follows to remove the throttle
body:
- remove the collars indicated (arrowed), then
unscrew both bolts (detail) and remove the
intake sleeve with resonator;
- release the accelerator cable terminal from
lever (A), then remove the adjustment block
from bracket (B) and place the accelerator
cable aside;
- disconnect the engine idle speed actuator
connector (1);
- unscrew the four retaining bolts (arrowed)
and remove the throttle body.
Reverse removal instructions to refit.
Adjust the accelerator cable as described in the
following paragraph.
NOTE If the throttle body is replaced, connect
a tester (Examiner) to the tester con
nection and run the required
procedure
to zero and self-learn engine idle ad
justment actuator (M.D.S.) data
Copyright Fiat Auto
V 99
Cancels and replaces
51