Fiat 1996 Brava Service Manual page 534

Bravo-Brava ^
16v
Auto transmission & differential
Removing-refitting
21-27.
1. Rotate the vertical link so as to withdraw
the drive shaft from the wheel hub (repeat
the procedure for the other drive shaft).
2. Disconnect the drive shaft on the gearbox
side from the differential, levering on the
anchorage point, and move it away from
the working area.
3. Disconnect the drive shaft on the timing
gear side from the differential, levering on
the anchorage point.
4. Differential oil seals.
When withdrawing the drive shafts,
take care not to damage the differen­
tia/ sea/s. Withdraw them perfectly
horizontally.
Remove the connectors shown in the fig­
ure in order to disconnect the oil pipes
from the gearbox. Then place the pipes
over to one side.
P4A57AB04
Copyright Fiat Auto 57