Introduction
Planned maintenance
Bravo
00.
Using a screwdriver, apply force to the au
tomatic tensioner tab so that the tensioner
is in the maximum tension position, then
tighten the nut fixing the tensioner to the
support.
Using spanner 1860831000, torque tight
en the inlet and exhaust side pullies to the
recommended figures.
Remove the tools positioned for timing
and locking the camshafts and rotate the
crankshaft through two revolutions in its
direction of rotation.
Loosen the nut fixing the tensioner and
ensure that the moving reference on the
tensioner (1) coincides with the fixed ref
erence (2), then tighten the nut fixing the
tensioner to torque and proceed with the
refitting of the components removed pre
viously.
34
Print no. 506.670/09