Bravo-Brava A t
16v
Auto transmission & differential
Removing-refitting
21-27.
Do not damage the converter centring nose
while fitting the gearbox. If the point is dam
aged, it could fail to fit onto the cranskshaft
correctly, and consequently damage the con
verter and oil pump.
Before fitting the transmission, make sure
that the converter is fitted properly on the oil
pump. If it is not fitted properly, the bush and
oil pump gearing could be damaged.
Make sure that the distance between the
holes of the bolts securing the converter to
the flywheel and the gearbox front surface is
29.4 mm.
P4A61AB02
P4A61AB03
When fitting the gearbox, check that the cen
tring pins are positioned correctly, and also
check that there is no gap between the con
tact line between the engine and gearbox cas
ing.
Copyright Fiat Auto
61