Fiat 1996 Brava Service Manual page 300

Bravo-Brava i g |
98 range
3116V
Engine
Fuel system
10.
FUEL MANIFOLD AND INJEC­
TORS
NOTE Before removing the manifold, dis­
charge the pressure inside following
the instructions given at the start of
this chapter.
Removing-refitting fuel manifold
Proceed with removing the manifold as fol­
lows:
- remove the bands shown (arrow); then,
undo the two bolts (detail) and remove the
inlet hose complete with resonator;
rotating the accelerator lever, release the
end of the accelerator cable from the lever
(A) then remove the adjuster from the
bracket (B) and move the accelerator cable
away;
disconnect the engine idle speed actuator
connector (1);
undo the bolts (arrow) fixing the upper
half of the manifold and remove the vapour
recirculation pipe (2).
Copyright by Fiat Auto
49