Fiat 1996 Brava Service Manual page 464

Engine
Fuel system
10.
Bravo-Btava I0t 16v
'98 range
1. Undo the bolts jointing the two sections of
the inlet manifold and remove the first sec­
tion (1).
2. Undo the bolts securing the fuel supply
manifold and the bolts securing the second
section of the inlet manifold to the engine
block, and remove it.
3. Remove the fuel pipe and remove the man­
ifold complete with fuel injectors.
4. Then remove the fuel injectors as follows:
- Disconnect the electrical connector (1).
- Remove the safety clip (2).
- Remove the fuel injector (3), which is a
press fit.
Never pull the electrical connector
to remove the injector.
Before refitting, check the condition
of the seals.
52
Publication no. 506.670/74