Clutch
Clutch operation
Bravo-Brava ^
TD 75
18.
P4A13DA03
1. Working from inside the car, remove the
roll pin retaining the clutch pump rod to
the pedal.
2. Unscrew the bolts retaining the clutch
pump to the body, remove slightly to re
lease the rod from the clutch pedal, then
remove complete with pipe connected to
the reservoir. At the bench, separate the
clutch pump from the pipe connected to
the reservoir.
REMOVING-REFITTING PIPE CONNECT
ING CLUTCH PUMP TO SLAVE CYLINDER
Remove the upper cam cover protec
tion and the guard in front of the
brake and clutch fluid reservoir, then
unscrew the bolts retaining the diesel
filter bracket and drain the brake and
clutch fluid from the reservoir, as de
scribed in the previous paragraph.
3. Unscrew the fitting of the pipe connecting
the pump to the slave cylinder on the
clutch pump.
4. Disconnect the battery terminal leads and
remove the battery from the engine bay af
ter detaching from the bracket. Also re
move the relay box cover.
10
Publication no, 508.876