Bravo-Brava !Q)i
TD7S
Engine
Fuel system
P4A05DA03
10.
P4A05DA02
REMOVING-REFITTING
ACCELERATOR
CABLE
Disconnect the battery negative terminal,
then proceed as follows:
1. Remove the upper cam cover protection.
2. In the engine bay, release the accelerator
cable by taking out retaining clip (1) and
unscrewing nut (2).
3. Working from inside the car, remove the
left foot rest and unscrew the bracket re
taining the air hose shown. Disconnect
the pipe from below to allow access to the
cable anchorage on the accelerator pedal.
4. Disconnect the control cable from its an
chorage on the accelerator pedal.
P4A01DA02
Copyright Fiat Auto
5