Engine
Fuel system
10.
Bravo-Brava ty 16v
98 range
- disconnect the air temperature and pres
sure sensor connector (2) and the injectors
cable connector (1) and remove the char
coal filter intake pipe (3);
- partly raise the half-manifold and remove
the brake servo vacuum inlet pipe (arrow);
- disconnect the rapid connector (4), undo
the fixing bolts (5) then remove the com
plete fuel manifold.
When refitting, repeat the operations de
scribed for the removal in the reverse order.
Removing-refitting injectors
To remove the injectors, proceed as follows:
- Disconnect the electrical connection (1).
- Remove the safety clip (2).
- Remove the injector (3) which is a press fit.
| M H Never act on the electrical connector
M M to remove the injector.
Before refitting, check the condition
of the seals.
50
Print no.
506.670/16