Fiat 1996 Brava Service Manual page 837

Bravo-Brava
Steering
Operation
41.
Position a hydraulic jack beneath the en­
gine and then unscrew the bolts retaining
the central engine mount and remove.
Prise off the head anchoring the gear lever
to the transmission mount, working from
the lower rear of the engine bay.
Unscrew the nuts and bolt shown in the
figure, which retain the power steering
fluid return line brackets to the reservoir.
Disconnect the fitting for the inlet line for
fluid under pressure from the pump and
the fitting of the fluid return line to the
reservoir.
Unscrew the bolts fastening the power
steering box to the front beam.
P4A43DA04
P4A43DA0B
Copyright Fiat Auto
5