Fiat 1996 Brava Service Manual page 229

Engine
Removing - refitting
Bravo-Brava ^
TDIOO
10.
Remove the bolts indicated from the bell
housing in order to position the tool used
to remove the power unit.
2. Position tool 1860860000 used to mount
the power unit on the hydraulic jack and
fasten to the power unit using the tools
shown.
The hydraulic jack must have a ca­
pacity of at least 1000 kg and it must
be sufficiently high to allow the pow­
er unit to be removed from below.
When calculating the height, consid­
er the maximum height setting of the
lift and the minimum height setting of
the hydraulic jack.
Remove the engine oil heat exchanger
from the fastenings shown, then secure to
the power unit.
10
Publication no. 506.670/08