Fiat 1996 Brava Service Manual page 548

Bravo-Brava igl
98 range
mi6v
Gearbox and differential
Removing-refitting
21.27
REMOVING-REFITTING
P4A01BB03
4 /[ /C
r^^^>
\^v
^ ^ ^ ^ ^ y^"
^w^
^Tw
/I /
Removing
Position the vehicle on a lift, remove the front
wheels then proceed as described below.
Undo the three fixing bolts and remove
the air intake disconnecting it firstly from
the air filter.
2. Disconnect the negative battery lead, re­
move the protective cover for the positive
pole, disconnect the terminal and separate
the latter from the starter motor supply
leads; undo the nut securing the battery to
the drip tray, then remove the latter from
the engine compartment.
3. Undo the bolt securing the relay casing
cover and remove it, then undo the nuts
fixing the casing to the battery drip tray
and place the casing at the side.
4. Remove the battery drip tray undo the
bolts fixing it to the bodyshell.
P4A01BB04
Copyright by Fiat Auto
1