Fiat 1996 Brava Service Manual page 535

Auto transmission & differential
Removing-refitting
Bravo-Brava lA|
16v
21-27.
1. Remove the guard shown in the figure
from the bottom of the gearbox.
2. Remove the bolts securing the converter
to the flywheel. First undo the two visible
bolts, then turn the crankshaft to gain ac­
cess to the remaining bolts (total of 6).
3. Undo the bolt shown in the fibure from
the valve assembly cover to allow the
gearbox support tool to be installed.
4-5. Place the gearbox support tool
1860873000 on a hydraulic jack, then
secure it to the gearbox at the points
shown in the figure. To fit the tool cor­
rectly, also fit a bracket (1), to be manu­
factured on site, of the dimensions
shown in the insert (dimensions in
mm).
58
Publication no. 506.670/07