Bravo-Brava ^
TD100
Engine
Fuel system
10.
Disconnect the vaccum pipe from the inlet
manifold and from the fast idle actuator
acting at the points shown.
Using spanner 1852138000 undo the
connectors for the fuel supply pipes at the
injectors.
Undo the connectors shown at the pump
using a spanner and remove the fuel sup
ply pipes.
Remove the injection pump acting on the
fixings shown in the diagram;.
To refit the injection pump reverse the
order of the operations carried out for
the removal with the exception of the
timing belt.
Before refitting the timing belt it is
necessary to check the timing and
then the tension of the belt as speci
fied in the paragraph "Replacing tim
ing belt" in the chapter "Removing-r-
efitting power unit".
Copyright by Fiat Auto
t X
"
9 6
"
U
P
d a t e
31