Engine
Fuel system
10.
Bravo-Brava ty> 16v
98 range
FUEL DRIP TRAY ASSEMBLY
NOTE In order to extract the assembly from
the tank, the fuel should not be high
er than the halfway mark.
Removing-refitting
Proceed with removing the fuel drip tray as
sembly as follows:
- remove the buttons (arrow) fixing the lug
gage
compartment
lining
using
tool
187807700 and remove it, then lift up
panel cover to gain access to the dust cov
er;
- undo the bolts (arrow) and remove the
dust cover;
- disconnect
the supply
pipe
(1), the
breather pipe (2) and the electrical con
nector (3);
- u s i n g tool 1860893000 remove the ring
nut securing the drip tray and extract the
drip tray from the tank, taking care not to
damage the seal.
When refitting, repeat the operations carried
out for the removal in the reverse order; at the
end, make sure that there are no fuel leaks.
48
Print no.
506.670/16