Fiat 1996 Brava Service Manual page 38

Introduction
Planned maintenance
Bravo-Brava
00.
Bravo 1998 20v
Check that the tension values for the alterna­
tor/air conditioning compressor drive belt
and the power assisted steering drive belt,
measured using the special equipment, cor­
respond to the recommended figures, given
in the table overleaf. If the tension values are
not correct, act on the centre tensioner screw
to adjust the power assisted steering belt ten­
sion, with the fixing bolts (1) slack, tension
and lock the bolts (1).
To adjust the tension of the alternator/air
conditioning cmopressor belt tension, act on
the special adjustment screw removing the
compressor cover, if necessary.
Bravo-Brava 1929 D
Check that the tension values measured us­
ing the special tool, correspond to the recom­
mended figures, given in the table overleaf. If
the tension values are not correct, act on the
bolts fixing the alternator and the screw for
adjusting the drive belt tension and the spe­
cial micrometeric screw and bolts fixing the
pump to correct the tension of the power as­
sisted steering pump drive belt tension.
4 Print no. 506.670/09