Fiat 1996 Brava Service Manual page 610

Bravo-Brava
Electrical system
Radio
55.
Selecting display modes
M 188:88
«w*»
Ma88.-88
Proceed as follows:
- keep the button (6) pressed until the colon between the hours and minutes stops flashing, and the let­
ters " M 1 " or "M2" appear depending on the selected display mode;
- press the (1) button to select the other display mode;
- briefly press the button (6) again to confirm the selection; the colon between the hours and minutes
starts flashing again and the letters " M 1 " or " M 2 " disappear.
Setting correct time
V v \ T l \ r ~ 6
M ,'88:88
I-
t1s88:88 ]
Keep the button (6) pressed until the colon be­
tween the hours and minutes stops flashing and
the letters " M 1 " or "M2" appear depending on
the selected display mode;
Adjust the hours and minutes on the display as
follows:
- to decrease the hours press button (2);
- to increase the hours press button (3);
- to decrease the minutes press button (4);
- to increase the minutes press button (5).
If the buttons (2-3-4-5) are pressed briefly, the hours and minutes are increased/decreased by one unit.
Press the buttons for longer to change the hours/minutes display quickly.
Once the correct time has been set, press the button (6) briefly again; this starts from 0 seconds so the
clock can be set accurately. The colon between the hours and minutes starts flashing again and the let­
ters " M 1 " or "M2" disappear.
Changing priority between display of time/frequency
Briefly press the button (6) to switch between the display of the clock and the messages relating to the
radio function, for a duration of 10 seconds; after which the indication which has priority depending on
the selected display mode with reappear automatically.
Copyright Fiat Auto
9