Fiat 1996 Brava Service Manual page 537

Auto transmission & differential
Removing-refitting
Bravo-Brava S i
16v
21-27.
1. Manoeuvre the hydraulic jack as appropri­
ate to release the gearbox from the sur­
rounding parts. Gradually lower the jack
and withdraw the gearbox.
■ ^ H Take particular care to prevent the
H H converter falling out of its seating.
When refitting, fit the gear change
control cable, then carry out the
checks described for removal of the
cable.
NOTE Top up the gearbox oil level and check
that there are no leaks from the drain
plug (tighten to 2.35 - 5.49 daNm).
0=
vi—
===
J^
\^y^k
-p- V\ \ \ \ A / \ 7 f f ) Wi" 1
^P^R^F
\ /JHs=i£^l_
%*Js&
PRECAUTIONS
After releasing the cable from the support
tool, do not place it directly on the floor, to
avoid damaging its structure and the external
components. Interpose a suitably shaped
wooden wedge.
If the gearbox is replaced, before fitting the
new transmission, remove the bracket (1) in
the converter seating and the plugs on the dif­
ferential outlet, fitted to stop foreign bodies
entering the gearbox. Remove the above-
mentioned plugs perfectly horizontally, to
avoid damaging the oil seals (2) on the differ­
ential and to prevent the spring (3) inside the
seals from falling out.
(?
L_ s
!c^
\ /
^M
£
^ .
*
60
Publication no. 506.670/07