Fiat 1996 Brava Service Manual page 858

Bravo-Brava
Bodywork
Interior trim
70.
1. Unscrew the retaining bolts indicated,
disconnect the connectors on the rear of
the instrument panel, then remove remove
from the instrument facia.
2. Remove the car radio with the aid of tools
1860897000.
Tool 1860897000 is made up of a left
hand part and a right hand part,
marked L and R respectively. The cor­
rection direction of use of each part is
indicated by means of an arrow (TOP).
It is advisable to work from the pas­
senger side to facilitate removal oper­
ations.
Move the car radio slightly to the left and
carefully fit right hand part (R) of tool
1860897000 until it clicks into the radio
clips. Use right hand part (R) to pull out
the right hand side of the radio slightly,
move it to the right and carefully fit the left
hand part (L) of tool 1860897000 until it
clicks into the radio clips. Grasp both sides
of the tool and pull the radio out partly,
then release both parts of tool
1860897000 from the radio.
Do NOT remove the radio by pulling
from the glove compartment, but on­
ly by using both parts of tool
1860897000 and following the pro­
cedure described previously.
Protect the area of the instrument facia
below the radio using a cloth, pull out the
radio fully and disconnect the supply
leads and aerial lead.
Copyright Fiat Auto 5