Fiat 1996 Brava Service Manual page 792

Bravo-Brava ^
12v
Engine
Fuel system
10.
P4A01DA02
REMOVING-REFITTING ACCELERATOR
CABLE
Disconnect the battery negative terminal,
then proceed as follows:
1. In the engine bay, turn the throttle valve
control lever and release the accelerator
cable. Remove the clip, then withdraw
the cable from the bracket.
2. Working from inside the car, remove the
left foot rest, then disconnect the control
cable from the anchorage on the accelera­
tor pedal.
3. Remove the pipe connecting the air clean­
er to the butterfly valve case.
4. Remove the relay unit protective cover.
5. Unscrew the relay bracket retaining bolts
and position unit to one side.
P4A01DA03
H- ■ — —
B I 1 ^
~
-
^si
c = >
ujrm
i^^^/y^^^^^^^^^ i>
P4A01DA04 P4A01DA06
Copyright Fiat Auto 1