Fiat 1996 Brava Service Manual page 865

Bodywork
Interior trim
Bravo-Brava @i
12v
70.
Disconnect bonnet opening cable (1)
from the seats of fastenings (2) and (3)
and from the retaining clip (4).
2. Release the bonnet opening cable from
the retaining clip located beneath the in­
jection control unit.
3. Working from beneath the steering wheel,
remove cap (A) from bonnet opening
lever (B), then release the end (C) of the
opening cable from seat (D).
Release opening cable fastener (E) from
seat (F) on the body.
Fasten the opening cable to a probe
in order to facilitate refitting through
the bulkhead between engine bay
and cabin.
Withdraw and disconnect the bonnet
opening cable.
NOTE Reverse order of removal operations to
refit.
P4A70DA03
12 Publication no. 508.876