Electrical equipment
Instrument panel
Bravo-Brava
55.
REMOVING-REFITTING
1. Disconnect the battery negative terminal,
then remove the lower steering column
trim by undoing the bolts indicated in the
figure.
2. Remove the upper steering column trim in
order to allow removal of the lower control
panel frame screws.
3. Unscrew the bolts fastening the outside of
the control panel frame.
4. Remove the junction unit protective cov
er. Unscrew the outer control panel frame
retaining screw. Remove the frame from
the facia and disconnect the lighting dim
mer and headlamp beam alignment con
nectors.
4
Publication no. 508.876