Electrical equipment
Air Bag
Bravo-Brava
55.
Move the air bag module slightly. Careful
ly disconnect connector indicated, taking
care nto to pull by the wire but by the con
nector case. Then remove the air bag
module and rest on the work bench with
the cover uppermost.
NOTE For safety reasons, when the module
connecter is disconnected the two
terminals automatically short circuit;
a special spring-loaded device keeps
both terminals connected.
2. Replace the module in the appropriate
cabinet. The diagram shows how the
module should be positioned.
NOTE Carry out removal operations in re
verse order to refit.
DO NOT CONNECT THE BATTERY
UNTIL INSTALLATION
IS COM
PLETE
NOTE After the operation, check the system
using a Fiat/Lancia Tester.
REMOVING-REFITTING CLOCK SPRING
Remove the driver's air bag as de
scribed on the previous page and ob
serving the SAFETY REGULATIONS
described.
All the following operations must be
carried
out
with
the
WHEELS
ALIGNED WITH THE LONGITUDI
NAL ACCESS OF THE VEHICLE
(wheels straight). Secure the steering
wheel if necessary.
3. Remove the horn connector from its seat
and disconnect, then unscrew the bolt re
taining the steering wheel to the steering
column.
Publication no. 508.876