Engine
Fuel system
Bravo-Brava igty
TD100
10.
1. Let the band (1) slide in the direction
shown by the arrow, then remove the ac
celerator cable from the injection pump
releasing it from the attachment pin and
removing- it from the mounting and adjust
ment bracket (2).
2. Disconnect the electrical
connections
shown
3. Disconnect the pipe (1) from the oil
vapour separator (2). Undo the nuts fix
ing the separator (2); a third nut (not illus
trated) is at the lower side of the separator.
4. Disconnect the pipe (1) which connects
the oil vapour separator to the tappet cov
er and move the actual separator towards
the engine compartment rear partition.
30
IX-96 - Update
Print no. 506.670/08