Bravo-Brava
Braking system
Hydraulic operation
33.
P4A29DA01
P4A29DA02
1. Remove the roll pin retaining the clutch
pump rod on the control pedal.
2. Release the electrical connector shown in
the figure from the pedal mount.
3. Remove the roll pin retaining the brake
servo rod to the control pedal transmis
sion.
4. Remove nuts retaining the pedal unit to
the body, then remove the pedal unit and
servo brake from the body by releasing the
clutch pedal from the clutch pump rod.
5. At the bench, unscrew the four bolts re
taining the brake servo to the pedal unit.
P4A29DA03
P4A29DA05
Copyright Fiat Auto
9