Fiat 1996 Brava Service Manual page 559

Gearbox and differential
External controls
Bravo-Brava I p u *
9 8 range
21.27
1. Undo the front and rear bolts fixing the
support for the external gearbox controls
and handbrake.
- Carefully lower the external controls sup­
port assembly from its housing, then re­
move the cables from the engine compart­
ment and extract the assembly from the ve­
hicle.
DISMANTLING AT THE BENCH
2. Remove the gear lever assembly, undoing
the bolts, then remove the rubber cable
cover.
3. Remove the two clips securing the cables
to the lever support.
4. Disconnect the cables from the lever sup­
port: the engagement one is a press fit and
the selector one is fixed by a circlip.
12
Print no. 506.670/17