Bodywork
Interior trim
Bravo-Brava
70.
P4A62DA02
1. Remove the clips, unscrew the bolts
shown and remove the tunnel trim from
the car. Lift the parking brake lever fully to
allow removal of the trim.
2. Remove the junction unit protection by
undoing the fastenings shown in the fig
ure.
3. Working from inside the junction unit
housing compartment, unscrew screw re
taining the instrument panel frame.
4. Unscrew the bolts indicated, then move
the instrument panel slightly to one side,
disconnect the headlamp alignment ad
juster and instrument light dimmer con
nections and then remove the frame.
P4A62DA03
4
Publication no. 508.876