Fiat 1996 Brava Service Manual page 741

Electrical equipment
Radio equipment
P4A42HL03
Bravo-Brava
9 8 r a n g e
Automatic tuning into RDS transmitters
Select the FM or A M frequency desired using
the BAND control (1).
The IS function should not be activated for
this type of selection. If the IS function is
switched on, press one of the " A " " T " but­
tons (2,3) for about 3 seconds until the mes­
sage "IS - -" and then "IS OFF" appears on
the display.
Pressing one of the " A " " T " buttons (2,3)
briefly starts the automatic search.
When an (RDS) transmitter w i t h an identifi­
cation code is found, it can be seen on the
display.
DX Function
The DX function makes it possible to choose
the sensitivity w i t h which to search for radio
transmitters. With the DX function activated,
the radio only selects stations above a certain
power level. With the DX function deactivat­
ed, radio stations with lower power levels are
also selected. To activate the DX function,
press the button (1); the function is then de­
activated if the same button is pressed again.
Automatic memorizing of transmitters
(AUTOSTORE Function)
Select the frequency desired using the BAN D
control (1). The message on the display w i l l
show the frequency range selected.
Press the BAN D control for about 6 seconds.
The display will show firstly the message
" A S " and then the scanning of the frequen­
cies.
When the scanning of the frequency range is
over, the six most powerful transmitters are
available w i t h the buttons (1,2,3,4,5,6).
4 2 Update
Print no. 506.670/17