Disassembling The Manual Starter - SELVA MARINE Wahoo 15 Service Manual

Table of Contents

Advertisement

POWR

Disassembling the manual starter

1. Remove the drive plate 1 and drive pawl
spring 1 2.
1
2
WARNING
The sheave drum can pop out. Hold the
sheave drum with your hand, and then
remove the drive plate.
2. Remove the sheave drum 3.
3
WARNING
The spiral spring can pop out. Cover the
spiral spring with rags, and then pull out
the sheave drum.
3. Remove the spiral spring 4 from the
manual starter cover.
WARNING
The spiral spring can pop out. Cover the
spiral spring with rags when removing it.
5-9
Power unit
S6AG5510
4
S6AG5520
4. Remove the starter rope 5 and E-clip 6,
5
and then remove the drive pawl 7 and
springs 8 from the sheave drum.
7
7
8
5. Check the drive pawl, E-clip, starter
plunger, and drive plate. Replace if
cracked or damaged.
6. Check the springs. Replace if bent,
cracked, or damaged.
7. Check the sheave drum. Replace if
cracked or damaged.
8. Check the spiral spring. Replace if
cracked, bent, or damaged.
6
5
S6AG5530
S6AG5550
S6AG5540
6AG3J11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wahoo 20

Table of Contents