Checking The Engine Stop Lanyard Switch (Tiller Handle Model); Checking The Engine Stop Lanyard Switch (Remote Control Model) - SELVA MARINE Wahoo 15 Service Manual

Charge coil output peak voltage:
Black/red (B/R) – Green/red (G/R)
Unloaded
r/min
Cranking
DC V 60 140
2. Disconnect the charge coil connectors.
3. Measure the charge coil resistance.
Replace the stator coil assembly if out of
specification.
Charge coil resistance
(reference data):
Black/red (B/R) – Green/red (G/R)
25.5–34.5 Ω at 20 °C (68 °F)
4. Connect the charge coil connectors.
Checking the engine stop lanyard
switch (tiller handle model)
1. Disconnect the engine stop lanyard
switch 1 connector and terminal.
1
W W
9
B
2. Check the engine stop lanyard switch 1
for continuity between the engine stop
lanyard switch connector and terminal
(engine stop lanyard
Replace if out of specification.
6AG3J11
Loaded
1,500 3,500
150 150
8
B
S6AG8140
switch end).
Ignition and ignition control system
a
c
Engine stop lanyard switch
continuity:
White (W) – Black (B)
Switch position
Clip installed a
Engine stop button
pushed b
Clip removed c
3. Connect the engine stop lanyard switch
connector and terminal.
Checking the engine stop lanyard
switch (remote control model)
1. Disconnect the 10-pin main harness cou-
pler.
b
B
W
S6AG8150
Continuity
No
Yes
Yes
8
8-24
1
2
3
4
5
6
7
8
9