Checking The Engine Start Switch (Remote Control Model); Checking The Neutral Switch (Tiller Handle Model With Electric Starter); Checking The Neutral Switch (Remote Control Model) - SELVA MARINE Wahoo 15 Service Manual

– +
ELEC
3. Check the engine start button 1 for con-
tinuity between the engine start button
connectors (engine start button end).
Replace if out of specification.
1
b
a
Engine start button continuity:
Red (R) – Brown (Br)
Button position
Free a
Pushed b
4. Connect the connectors of the engine
start button 1.
Checking the engine start switch
(remote control model)
1. Disconnect the 10-pin main harness cou-
pler.
2. Measure the input voltage between the
10-pin main harness coupler (outboard
motor end) and the ground. Check the
fuse and wiring harness if below specifi-
cation.
8-19
Electrical system
Br
R
S6AG8180
Continuity
No
Yes
R
S6AG8190
Engine start switch input voltage
(reference data):
Red (R) – Ground
12 V (battery voltage)
3. Set the remote control lever to the neu-
tral position.
4. Check the engine start switch for continu-
ity at the 10-pin main harness coupler
(remote control box end). Check the wir-
ing harness and neutral switch, or
replace the engine start switch if out of
specification.
8
Switch
position
OFF
ON
START
5. Connect the 10-pin main harness cou-
pler.
Checking the neutral switch (tiller
handle model with electric starter)
1. Disconnect the neutral switch 1 connec-
tors.
ON
OFF START
3
4
1
2
5
Lead color
White Black Red Yellow
(W) (B) (R) (Y)
1 2 3 4
S6AG8200
Brown
(Br)
5
8
6AG3J11