Viewing Test Call Statistics - AudioCodes Mediant 800B User Manual


"Running": test call has been started (i.e., the Dial command was clicked)

"Receiving": test call has been automatically activated by calls received for the test
call endpoint from the remote endpoint (when all these calls end, the status returns to
"Idle")

"Terminating": test call is in the process of terminating the currently established calls
(this occurs if the Drop Call command is clicked to stop the test)

"Done": test call has been successfully completed (or was prematurely stopped by
clicking the Drop Call command)
A more detailed description of this field is displayed below the table when you click the
Show/Hide button (see ''Viewing Test Call Statistics'' on page 892).
58.3

Viewing Test Call Statistics

In addition to viewing a brief status description of the test call in the 'Test Status' field (as
described in ''Starting, Stopping and Restarting Test Calls'' on page 891), you can also
view a more detailed status description which includes test call statistics.

To view statistics of a test call:
1. Open the Test Call table (Configuration tab > System menu > Test Call > Test Call
Table).
2. Select the test call table entry whose call statistics you want to view.
3. Click the Show/Hide button; the call statistics are displayed in the Test Statistics
pane located below the table, as shown below:
The 'Test Statistics' pane displays the following test session information:

Elapsed Time: Duration of the test call since it was started (or restarted).

Active Calls: Number of currently established test calls.

Call Attempts: Number of calls that were attempted.

Total Established Calls: Total number of calls that were successfully established.

Total Failed Attempts: Total number of call attempts that failed.

Remote Disconnections Count: Number of calls that were disconnected by the
remote side.

Average CPS: Average calls per second.

Test Status: Displays the status (brief description) as displayed in the 'Test Status'
field (see ''Starting, Stopping and Restarting Test Calls'' on page 891).

Average CPS: Average calls per second.

Detailed Status: Displays a detailed description of the test call status:
User's Manual
Figure 58-2: Viewing Test Call Statistics
892
Mediant 800B Gateway and E- SBC
Document #: LTRT-10296