Resolving Ip Address Problems - RADVision Scopia XT5000 Administrator's Manual

Resolving IP Address Problems

Problem
Possible Causes
Solution
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
2. Make sure that the Moving field is set to Yes.
3. From the web interface only, select Save.
Cannot configure the IP address.
If the icon for no network connection
assigned IP address, the system is not connected to network or has an invalid IP address
(for details on viewing the system's IP address, see
Customer Support on page 129).
Make sure the GLAN cable is connected properly at both ends: to the network socket and to
the GLAN1 port of the XT Codec Unit, as shown in
Figure 89: Enabling the Moving setting
appears and the system displays 0.0.0.0 as its
Viewing System Information for
Figure 90: GLAN1 port
Troubleshooting the Scopia XT Endpoint for IP Office | 144
on page 145.