RADVision Scopia XT5000 Administrator's Manual page 47

There is also a unicode version of the system name for users who want the name displayed on the
titlebar to contain non-English characters. For more information, see
the Titlebar
You can also select the country in which the system is located and the language in which the system
menus are displayed.
After initial setup, you can modify these settings by selecting Configure > General from the Main menu,
or from the web interface as described in
53.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Setup Procedure
Procedure
1. Enter the name of the XT Endpoint in the System Name field. This name is also used for the
2. Select the required country from the Country list. If performing this task from the endpoint
3. If you want to change the language of the system menus, select Language.
4. To adjust the image on your monitor, select Next and continue with
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
on page 54.
on page 45.
SIP username and the H.323 name, which can be manually changed.
If you perform this task from the endpoint interface, use the alphanumeric keys of the XT
Remote Control Unit (for more information, see
30).
Figure 19: Setting Country and Language
interface, use the arrow keys and press ok/menu.
The system menu and the Language field automatically change to the language used in the
selected country.
If performing this task from the endpoint interface, press ok/menu to display the list of
languages. Scroll to the preferred language and press ok/menu.
Position on page 48.
Remotely Setting the System Name and Language
Using the XT Remote Control Unit
Modifying the System's Name on
on page
Accessing the Quick
on page
Adjusting the Image
Initial Configuration | 47