Backing Up And Restoring Xt Endpoint Certificates - RADVision Scopia XT5000 Administrator's Manual

5. Continue with

Backing Up and Restoring XT Endpoint Certificates

About this task
This section explains how to backup and restore certificates using a USB key to store the certificate
information. You can only perform this procedure from the endpoint's interface. If you want to delete the
certificates without first backing them up, proceed as explained in
page 106.
Procedure
1. Connect a USB key to the upper USB port of the XT Codec Unit
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Tip:
Verify that the system's time is synchronized with SNTP, otherwise you may need to wait a
few hours before using this certificate (for details, see
You can start using this certificate at the time indicated by the notBefore value in the
signed certificate.
Figure 57: Signed certificate from the CA
Enabling the TLS Connection in XT Endpoint
USB Key to the XT Codec Unit
Setting Date and Time
Deleting XT Endpoint Certificates
on page 106).
Securing your Scopia XT Endpoint for IP Office | 105
on page 57).
on page 107.
(Figure 58: Connecting a
on