Maintaining The Xt Endpoint Locally From The Endpoint - RADVision Scopia XT5000 Administrator's Manual

6. Set the code and exit by doing one of the following:

Maintaining the XT Endpoint Locally from the Endpoint

About this task
To perform advanced configuration and maintain the Scopia XT Endpoint for IP Office from the endpoint
itself, you must first perform this procedure to access advanced settings. For example, you can upgrade
the XT Endpoint. For more information about maintaining the XT Endpoint, see
XT Endpoint for IP Office
You can also perform advanced configuration from the web interface. See
from the Web Interface
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is 1234.
Procedure
1. From the endpoint's main menu, select Configure > General.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Important:
The code and icon do not appear when the default code, 01, is used.
• In the web interface, select Finish.
• In the endpoint, press OK.
on page 112.
on page 24 for details.
Maintaining the Scopia
Managing your XT Endpoint
Getting Started with Managing the XT Endpoint | 35