Configuring Network Connectivity - RADVision Scopia XT5000 Administrator's Manual

6. From the web interface only, select Save.
7. If you secured your XT Endpoint using TLS certificates and you now modified the IP address,

Configuring Network Connectivity

About this task
This procedure describes how to configure the GLAN1 and GLAN2 ports.
You may want to enable both GLAN1 and GLAN2, for example, to use one network connection for
control and another for videoconferences.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
Procedure
1. Access the network settings as follows:
2. Select Parameters under GLAN.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Field Name
Gateway IP Address If the system gets its IP address automatically, this field indicates
the gateway IP address assigned to the system.
If you entered the system's IP address manually, type the gateway
IP address.
DNS Server IP If the system gets its IP address automatically, this field indicates
Address the DNS server IP address assigned to the system.
If you entered the system's IP address manually, type the DNS
server IP address.
you must generate the CSR again, as described in
for XT Endpoint on page 101.
• From the XT Endpoint web interface, select Administrator Settings > Networks.
• From the endpoint's main menu, select Configure > Advanced > Networks.
Description
Generating a Certificate Signing Request
on page 35.
Initial Configuration | 84